Mercusys MW155R - 4.4 Wireless

MW155R
150Mbps Wireless N Router User Guide
-18-
4.3.4 MAC Clone
Go to Network
→
MAC Clone, you can configure the MAC address of the WAN on the screen
below.
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
 MAC Address - Displays the current MAC address of the WAN port. If your ISP requires
you to register the MAC address, please enter the correct MAC address into this field in
XX-XX- XX-XX-XX-XX format(X is any hexadecimal digit).
 M AC Ad dre ss of your PC - Displays the MAC address of the PC that is managing the
router. If the MAC address is required, you can click Clone MAC Address and this MAC
address will fill in the M AC Ad d re ss field.
Click Save to make your settings effective.
4.4 Wireless
There are five submenus under the Wireless menu: Basic Settings, Wireless Security,
Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and
you will be able to configure the corresponding function.
NOTE:
Only the PC on your LAN can use the MAC Clone function