-29-
2. Enter the MAC address (in XX- XX-XX-XX-XX-XX format.) and IP address in dotted-decimal
notation of the computer you wish to add.
3. Click Save.
To modify or delete an existing entry:
1. Click Edit in the entry you want to modify. If you want to delete the entry, click Delete.
2. Modify the information.
3. Click Save.
Click Enable All/Disable All to make all entries enabled/disabled.
Click Delete All to delete all entries.
Click Ne xt to go to the next page and click Previous to return the previous page.
4.6 Forwarding
There are three submenus under the Forwarding menu: Virtual Servers, DM Z and UPnP. Click
any of them, and you will be able to configure the corresponding function.
4.6.1 Virtual Servers
Go to Forwarding
Virtual Servers, you can view and add virtual servers. Virtual servers can
be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual
server is defined as a service port, and all requests from the Internet to this service port will be
redirected to the computer specified by the server IP. Any PC that was used for a virtual server
must have a static or reserved IP Address because its IP Address may be changed when using
the DHCP function.
To Next Page
Loading...
Need help?
General
