Mercusys MW155R User Manual

MW155R
150Mbps Wireless N Router User Guide
-30-
 Se rvice Port - The numbers of external ports. You can type a service port or a range of
service ports (in XX – YY format, XX is the start port number, YY is the end port number).
 Internal Port - The internal service port number of the PC running the service application.
You can leave it blank if the Internal Port is the same as the Service Port, or enter a
specific port number when Service Port is a single one.
 IP Address - The IP address of the PC providing the service application.
 Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols
supported by the router).
 Status - The status of this entry either Enabled or Disabled.
To set up a virtual server entry:
1. Click Ad d.
2. Enter the service port or select the service you want to use from the Common Service Port
list.
3. Enter the IP address of the computer in the IP Address field.
4. Select the protocol used for this application, either All, TCP or UDP.
5. Select Enable to enable the virtual server.
6. Click Save.

Mercusys MW155R Specifications

General

Brand	Mercusys
Model	MW155R
Category	Network Router
Language	English