-16-
If you want to do some advanced configurations, click Adv ance d, and you can see the page
shown below.
M TU Size - The default MTU size is 1480 bytes. It is NOT recommended that you change the
default MTU Size unless required by your ISP.
Service Name - The service and server name, which should not be configured unless you
are sure it is necessary for your ISP.
In most cases, leaving these fields blank will work.
ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the
router during login, select Use IP address specified by ISP and enter the IP address
provided by your ISP in dotted-decimal notation.
Primary/Se condary DNS - If your ISP does not automatically assign DNS addresses to the
router during login, select Use the following DNS servers and enter the IP address in
dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server
address is available, enter it as well.
Click Save to make your settings effective.
NOTE:
Caution: Sometimes the connection cannot be terminated although you specify a time to Max
Idle Time, since some applications are visiting the Internet continually in the background.
To Next Page
Loading...
Need help?
General
