-45-
M AC Ad dr e s s - The MAC address of the controlled computer in the LAN.
IP Address - The assigned IP address of the controlled computer in the LAN.
Bind - Check this option to enable ARP binding for a specific device.
Modify - To edit or delete an existing entry.
Click Enable All to make all entries enabled.
Click Delete All to delete all entries
To add IP & MAC Binding entries, follow the steps below.
1. Click Add.
2. Enter the MAC Address and IP Address and click Save .
3. Select the Bind checkbox.
4. Click Save.
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click Edit or Delete as desired on the Modify column.
To find an existing entry, follow the steps below.
1. Click Find.
2. Enter the MAC Address or IP Address.
3. Click Find, and the result will be displayed in the table below.