13
▪ SMPTE 2110-10 support: PTP v2 (IEEE 1588)
Microphone Preamplifiers
▪ Unprecedented audio transparency with a Dynamic Range (A Weighted) of 139 dB Typical
▪ 48V phantom power, Low cut filter, Pad and Boost, Phase inversion, Stereo Linking, Lock
and Cut features
▪ Dual Gain 32 bit AD circuitry
▪ Huge Dynamic Range with ample headroom
▪ Totally clickless Gain steps
▪ Split Channel feature
▪ Possibility to independently control FOH & Monitoring Microphone Gains without any
conflict
▪ Possibility to cut input signals to FOH while monitoring it from other outputs (e.g.
Headphones) for signal check by example.
Instrument/Line inputs
▪ Two Instrument/Line inputs on front panel. Can be used for Hi-Z instruments or Line
inputs
▪ Dynamic Range (A Weighted) of 136 dB Typical
▪ Independent gain levels for Instrument or Line inputs
▪ Dual Gain and Split channels feature as above
Monitoring
▪ Two Individual stereo main balanced XLR outputs with mono, dim, mute, level control and
mixing possibilities. Can be used for Main monitor set
▪ Two Individual stereo main balanced TRS outputs with mono, dim, mute, level control and
mixing possibilities. Can be used for auxiliary monitors of additional Cue Mix
▪ Two independent headphones sockets with independent level control
▪ Two exceptional high-power headphone amps with dedicated DACs
▪ Mute switch for any outputs
▪ The remote allows control of volume level and source selection of any Merging RAVENNA
Device on the network
▪ In the Box and Expandable I/O through Hapi, Horus or any RAVENNA/AES67 devices
▪ Up to 8 Monitors capable of up to 22.2 (maximum 32 channels)
▪ Up to 128 Sources capable of up to 22.2 (maximum 128 channels -2 dedicated to
Talkback)
▪ Up to 256 channels Analogue, MADI, AES3, SPDIF, Pro Tools HD I/Os via
RAVENNA/AES67
▪ In-the-box I/O pairing management with Merging devices
▪ Any other RAVENNA/AES67 devices pairing using ANEMAN
To Next Page
Loading...
