58
INFO Settings
Info
Find all information about the Anubis model, Firmware version, Maintenance mode and Serial
Number along with additional information on the Anubis status: Temperature, CPU and Memory
usage.
Note: Anubis users should regularly check if a new firmware is available. It is important to update to
the latest firmware in order to benefit from the latest improvements and fixes. Follow the firmware
update procedure for all details.
DEBUG Settings
Debug
Loopback: Internal module with Generator (Supporting 1FS) and transparency check tool
(Supported up to 384kHz).
Enabling the Loopback will provide access to the Loopback module within the Anubis I/O’s.
Note: The Loopback parameters can be accessed from the external debug pages, contact Merging for
more details.
To Next Page
Loading...
