Metronix ARS 2320 FS User Manual

Safety notes for electrical drives and controllers Page 11
Product Manual / Mounting Instructions „Servo drives ARS 2320 FS, ARS 2340 FS and ARS 2360W FS“ Version 1.0
Without claiming completeness, the following regulations and others apply:
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC
requirements and specific test methods
EN 61800-5-1
Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements - Electrical, thermal and energy
EN 61800-5-2
Adjustable speed electrical power drive systems - Part 5-2: Safety
requirements - Functional
EN ISO 12100
Safety of machinery - General principles for design - Risk
assessment and risk reduction
EN ISO 13849-1:2015
Safety of machinery - Safety-related parts of control systems - Part
1: General principles for design
EN 62061
Safety of machinery - Functional safety of safety-related electrical,
electronic and programmable electronic control systems
IEC 61508 Part 1-7
Functional safety of electrical/electronic/programmable electronic
safety-related systems
IEC 82079-1
Preparation of information for use (instructions for use) of products
- Part 1: Principles and general requirements
EN 50581
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
UL 61800-5-1
Standard for Adjustable Speed Electrical Power Drive Systems -
Part 5-1: Safety Requirements - Electrical, Thermal and Energy
CSA C22.2 No. 274
Adjustable speed drives
2.6.2 Safety notes for assembly and maintenance
The appropriate DIN, VDE, EN and IEC regulations as well as all national and local safety regulations and
rules for the prevention of accidents apply for the assembly and maintenance of the system. The plant
engineer or the operator is responsible for compliance with these regulations:
The servo drive must only be operated, maintained and/or repaired by personnel trained and
qualified for working on or with electrical devices.
Prevention of accidents, injuries and/or damages:
Additionally secure vertical axes against falling down or lowering after the motor has been
switched off, for example by means of:
 Mechanical locking of the vertical axle,
 External braking, catching or clamping devices or

Metronix ARS 2320 FS Specifications

General

Brand	Metronix
Model	ARS 2320 FS
Category	Servo Drives
Language	English