XTreme-EMS Operating Manual Page 2
1 Features
• 4.3” high resolution 480x272, sunlight readable, wide viewing angle, 1000cd/m2 TFT LCD display
• LED backlight (brightness can be adjusted for low light flying conditions)
• Fits standard 3 1/8” (80mm) aircraft instrument panel hole
• The engine display screen is automatically configured to optimize screen space depending on what
engine parameters has been selected
• SD Card interface for data recording, user splash screens, checklists, graphic information pages, firmware
upgrades
• Records maximum and minimum values of most displayed values
• Built in black box recorder – records all engine data, GPS data (if available) and UL Power ECU data (if
available) to SD card. Data is stored on the SD card in a Comma Separated Value file and can be imported
into programs such as Microsoft Excel and Libre.
• Includes a 100 entry automatic flight log (Records start date & time, flight time, pilot number, Hobbs time
and maintenance time) which can be exported to SD card and can be imported into programs such as
Microsoft Excel and Libre.
• User configurable start up (Splash) screen
• Configurable checklists
• Configurable graphic information displays
• Automatic or manual local magnetic variation
• Dual menu system for quick item selection and user setups
• Sunrise/Sunset calculator
• Firmware upgrades via SD Card
• 1 year limited warranty
• 2x RS232 communication ports (UL Power Interface / External GPS receiver)
• 1x CAN communication port (RDAC-XF / RDAC-XG / MAP / RDAC-CAN interface)
• Rotary control plus 5 independent buttons for easy menu navigation and user input
• External alarm switch output for an external indicator lamp etc
• Support for an external GPS receiver with dedicated GPS display
• Built in RTC (Real Time Clock)
• Wide input supply voltage range of 8 to 30V DC
• Built in voltage reversal and over voltage protection for harsh electrical environments
• Light weight design
EGT / CHT
• Can measure up to 12 thermocouple channels
• EGT/CHT Temperatures can be displayed in ºC or ºF from -100ºC to 1200ºC (-148ºF to 2192ºF)
• High accuracy: Built in thermocouple linearization curves and cold junction compensation
• Includes a 250 second EGT/CHT trend graph display of each thermocouple channel
• Records maximum EGT/CHT temperature reached for each channel
• Includes an engine leaning feature
• Includes an engine cruise feature
• Special Rotax 912/914 engine monitor mode utilizing the standard built in Rotax NTC CHT probes
RPM / Rotor RPM
• Single or dual RPM display screens
• Dedicated dual rotor / engine tachometer
• Includes a magneto check function
• RPM can be displayed in RPM or in percentage
• Records maximum RPM reached for each channel
• Programmable RPM labels
To Next Page
