XTreme-EMS Operating Manual Page 22
The XTreme uses the following algorithm to determine if a flight is in progress (“AUTOMATIC” mode): If the ground speed
is greater than the preset “FLIGHT DETECT MIN GROUND SPEED” value or the RPM 1 & 2 is greater than the preset
“FLIGHT DETECT MINIMUM RPM1 2” value for a duration of 60 seconds or more, a flight is started with a logbook entry.
The flight ends if ground speed or RPM falls below the preset value for 30 seconds.
The above algorithm ensures that touch-and-goes will not result in the end of a flight and a logbook entry.
FLIGHT DETECT MINIMUM RPM1: (Automatic mode only)
Enter the minimum RPM 1 threshold that will start a new flight log entry.
FLIGHT DETECT MINIMUM RPM2: (Automatic mode only)
Enter the minimum RPM 2 threshold that will start a new flight log entry.
FLIGHT DETECT MINIMUM GROUND SPEED: (Automatic mode only, External GPS Required)
Enter the minimum ground speed threshold that will start a new flight log entry.
4.2.1 Flight Log output file format .CSV (Comma Separated Values)
The Xtreme-EMS will create a Comma Separated Values (.csv) file called XTFlight.csv in the root directory of the SD
card.
Below is the format of the .CSV data
Date & Time:
Hobbs Minutes: Hobbs time in minutes
To Next Page
Loading...
