XTreme-EMS Operating Manual Page 39
TEMPERATURE UNIT:
Select whether you want the temperature to be displayed in degrees Celsius (ºC) or in degrees Fahrenheit (ºF).
DISPLAY MAX:
Select the maximum temperature that you want the oil temperature bargraph to show. This can give you increased
display resolution.
DISPLAY MIN:
Select the minimum temperature that you want the oil temperature bargraph to show. This can give you increased display
resolution.
HIGH ALARM:
This enables or disables the temperature high alarm.
HIGH ALARM:
Enter the temperature threshold for when the high alarm must be activated. Any temperature above this value will activate
the alarm.
HIGH CAUTION:
Enter the temperature value for the high caution. This is the lower value of the upper yellow band.
LOW CAUTION:
Enter the temperature value for the low caution. This is the upper value of the lower yellow band.
LOW ALARM:
This enables or disables the oil temperature low alarm.
LOW ALARM:
Enter the temperature threshold for when the low alarm must be activated. Any temperature below this value will activate
the alarm.
To Next Page
Loading...
