XTreme-EMS Operating Manual Page 4
Current
• Uses the MGL Avionics Closed Loop Current Sensor to measure the aircrafts current load.
• Records maximum and minimum current reached in permanent memory
UL Power ECU Display
• Displays engine information from the UL Power ECU (Engine Control Unit) via the RS232 port
• The Xtreme-EMS has a dedicated UL Power ECU display screen
• Displays warning messages from the UL Power ECU
Rotax 912is
• Displays engine information from the Rotax 912is ECU via the RDAC-CAN interface
• The Xtreme-EMS has a dedicated Rotax 912is display screen
• Displays Engine, Sensor and Device Status messages from the Rotax 921is ECU
To Next Page
Loading...
