Page 61
Appendix| Accessories
scanCONTROL 26xx
Protective cooling housing Protective housing for use of the scanner
in dirty environments or with increased
ambient temperatures. With air purge of the
optical path and water cooling circuit for
sensor cooling.
2D/3D Output Unit
The 2D/3D Output Unit is addressed via
Ethernet and outputs analog and digital
signals. Different output terminals can be
connected to the fieldbus coupler.
2D/3D Gateway
The 2D/3D Gateway communicates with the
scanCONTROL SMART sensor via Ether-
net Modbus. The resultant values are then
converted to the PROFINET, EtherCAT or
EtherNet/IP fieldbus systems. The gateway
can also be parameterized in advance at
the factory.
Connector/8-pin/Ethernet Plug for the Ethernet socket, shielded,
cutting-terminal connector, A-coded
Connector/12-pin/Multifunction Plug for multifunction port, shielded, solder
connection, A-coded
To Next Page
Loading...