Page 9
Safety
scanCONTROL 30xx
1.5 Proper Environment
- Protection class
Sensor: IP67 (applies only when connected output connectors or protective caps)
- Temperature range
Operation: 0 ... +45 °C (+32 ... +113 °F) (with free air circulation)
Storage: -20 ... +70 °C (-4 ... +158 °F)
- Ambient pressure: Atmospheric pressure
- Humidity: 5 - 95 % (non condensing)
The protection class does not apply for the optical sections during operation as their soiling / contamination results in adversely affect-
ing or failure of the function.
Only use shielded cables or original cables from the range of accessories for the connection to a power supply and for the outputs.
Note also the assembly and installation instructions, see Chap. 5.
The IP67 protection class is a specification which is limited to the protection with respect to dust and water. Oil, steam and emulsion
penetration are not included in this protection class and must be tested separately.
To Next Page
Loading...
Need help?
General