Midland SP-8 - Operator Console Assembly

www.roadwidener.com
104
Model SP-8 &10
13.8 eleCtrICAl InstAllAtIon, dIode Box AssemBly (duAl sIded) sp-2162
notes:
1. Wires marked with * are from the caneld connector.
2. The green wire from the caneld connector is not used.
3. The black lead wires from the caneld connector go to the 12 volt supply, the white lead wires go to
ground.
4. The wires in phantom are from the harness cable and are installed at machine assembly.
5. The diode box shows connections for all common options in dual sided SP machines