Midland SP-8 User Manual

1
www.roadwidener.com
Model SP-8 & 10
Midland Machinery Co., Inc.
101 Cranbrook Ext.
Tonawanda, NY 14150
Phone: 716-692-1200
Fax: 716-692-1206
www.midlandmachinery.com
SP-8 &10 Operation, Parts & Service Manual
Revision July 2012
Machine Serial Number : ______________

Midland SP-8 Specifications

General

Brand	Midland
Model	SP-8
Category	Utility Vehicle
Language	English

Summary

Safety

4.1 Safety Alert Symbol And Signal Words

Explains safety symbols, DANGER, WARNING, CAUTION, NOTICE.

4.2 Hazards

Overview of general hazards associated with machine operation.

4.3 Operation And Maintenance

Safety guidelines for operating and maintaining the machine.

4.4 Hazards From Modifying Equipment

Operation

5.1 Operational Safety

Essential safety practices for operating the machine safely.

5.2 Startup Procedure

Step-by-step guide for starting the machine.

5.3 Strike-Off Blade Setup

Instructions for adjusting and setting the strike-off blade.

5.4 Push Roller Setup

Procedures for positioning and adjusting the push rollers.

5.5 Set Hopper Gates

5.6 Operation

General procedures for operating the machine.

5.7 Side Changeover For Material Discharge And Blade

Instructions for changing paving side.

5.8 Loading For Transport

Service And Maintenance

6.1 Service Intervals

Recommended schedule for routine maintenance tasks.

6.2 Drive Axle And Transmission Lubrication

6.3 Conveyor Belt

Procedures and guidelines for conveyor belt maintenance.

6.4 Hydraulic System Flushing Procedure

Steps for flushing the hydraulic system after component failure.

Blade And Column Assembly

11.1 Blade And Column Assembly SP-8/SPD-8

11.2 Blade And Column Assembly SP-10/SPD-10

11.3 Hydraulic Blade Extension Installation For SP-8, SP-751

11.4 Hydraulic Blade Extension Installation For SP-10, SP-752

Engine And Controls Assembly

12.1 Engine And Controls Assembly SP-8/SPD-8

12.2 Engine And Controls Assembly SP-10/SPD-10

Electrical Installation

13.1 Electrical Install’n, Standard Config’n, Single Sided, SP-772 Rev-A

Standard electrical installation for single-sided machines.

13.2 Optional Neutral Position Brake Switch Safety

13.3 Optional Dual Discharge System

13.5 Optional Auto Grade And Slope (Single Sided)

Electrical installation for auto grade/slope on single-sided.

13.6 Optional Auto Grade And Slope (Dual Sided)

Electrical installation for auto grade/slope on dual-sided.

13.7 Diode Box Assembly (Single Sided) SP-2161

13.8 Diode Box Assembly (Dual Sided) SP-2162

Operator Console Assembly

15.1 Operator Console Assembly (Single Sided) SP-1355 Rev-B

Assembly details for the single-sided operator console.

15.2 Operator Console Assembly (Dual Sided) SPD-1355 Rev-B

Assembly details for the dual-sided operator console.

Hydraulic Installation

16.1 Hydraulic Installation SPD-8, SPD-10 (Dual Sided), SP-770 Rev-C

Hydraulic installation schematic for dual-sided models.

16.2 Hydraulic Installation SP-8, SP-10 (Single Sided), SP-769 Rev-C

Hydraulic installation schematic for single-sided models.

Options

18.1 Hydraulic Push Roller Assembly, SP-711

OEM Component Parts And Service Information

OEM Component Parts and Service Information