37
www.roadwidener.com
Model SP-8 & 10
Item number corresponds to number on drawing to
indicate location on machine.
Hours mentioned are machine hours
See OEM engine, axle and transmission manuals for
detailed service information.
^ WARNING
Prevent serious injury or death.
Before performing inspections, service or
maintenance:
• Park machine on rm, level surface and
engage parking brake.
• Switch engine off.
• Close and lock control panel cover.
• Chock tires.
^ WARNING
Pressurized uids can penetrate the skin.
Hydraulic hoses can fail from age, damage
and exposure.
Use body and face protection while
searching for leaks. A tiny, almost invisible
leak can penetrate the skin, thereby
requiring immediate medical attention.
Use wood or cardboard to detect hydraulic
leaks, never use your hands.
No Description Interval
Daily 7
days
50
hrs
100
Hrs
30
days
200
Hrs
250
Hrs
700
Hrs
Ann-
ually
1000
Hrs
As
Req.
1 Lubricate Take Up Bearings •
2 Lubricate Column •
3 Check Hydraulic Oil Level •
4 Check Belt Scraper & Sideboard Rubbers •
5 Check Engine Oil Level •
6 Check Engine Coolant Level •
7 Check Oil Level On Rear Axle Hub •
8 Check Hydraulic Oil Filter Gage •
9 Lubricate Rear Brake Mechanism •
10 Lubricate Conveyor Chain •
11 Check Oil Level On Drive Axle •
12 Check Oil Level On Differential •
13 Lubricate Fittings On Axles and Differential •
14 Check Oil Level On Transmission •
15 Lubricate Hydraulic Blade Extension Guides •
16 Lubricate Blade Hinges •
17 Lubricate Push Tubes Extension & Ball Joints •
18 Change Hydraulic Oil Filters •
19 Change Transmission Filter •
20 Change Fuel/Water Separator Element •
21 Change Oil On Drive Axle and Differential •
22 Change Hydraulic Oil •
23 Change Transmission Oil •
24 Change Axle Planetary Oil •
25 Lubricate Push Rollers •
To Next Page