Midland SP-8 - Page 85

79
www.roadwidener.com
Model SP-8 & 10
NO REQ DESCRIPTION PART NUMBER
39 18 LOCK WASHER, 1/2 LKW-1/2
40 1 HEX HD CAP SCREW 5/8-11
UNC x 2-1/2
HCS-5/8-11-2.50
41 5 HEX HD CAP SCREW 5/8-11
UNC x 5-1/2
HCS-5/8-11-5.50
42 1 ELASTIC STOP NUT, 5/8-11
UNC
ESN-5/8-11
43 5 HEX NUT, 5/8-11 UNC HXN-5/8-11
44 5 LOCK WASHER, 5/8 LKW-5/8
45 2 HEX JAM NUT, 3/4-16 UNF HJN-3/4-16
46 1 HEX HD CAP SCREW 1-8
UNC x 6-1/2
HCS-1-8-6.50
47 1 HEX NUT, 1-8 UNC HXN-1-8
48 1 LOCK WASHER, 1 LKW-1
49 1 PIN, HITCH 1/4 x 3-1/2 SA-349-27
50 1 OUTER EDGER ASSEMBLY,
SP-8/-10 BLADE
SP-590
51 1 MTG BRACKET (EDGER-
OUT)
SP-483
52 1 HINGE PIN (EDGER-OUT) SP-486
53 1 BRACE (EDGER-OUT) SW-560
54 10 HAIRPIN, COTTER, ZINC
PLATED
M11013
55 1 CLIP ANGLE SP-589
Note:
Item 18 is an option and is sold separately.
NO. REQ DESCRIPTION PART NUMBER
1 1 COLUMN (FIXED) SP-421
2 1 COLUMN (MOVEABLE) SP-426
3 1 CYL RING SP-431
4 1 KEY (AT CYL RING) SP-434
5 1 BLADE PIVOT, CURVED
BLADE ASS’Y.
SP-435
6 1 BLADE SECTION (1 FT) SP-441
7 2 BLADE SECTION (2 FT) SP-444
8 1 EDGER (INNER) SP-447
9 1 EDGER MOUNT (EDGER-IN) SP-451
10 1 HINGE PIN (EDGER-IN) SP-453
11 2 GUIDE (EDGER-IN) (5-1/2 x
11)
SP-455
12 1 MTG BRACKET (SLOPE
TUBE)
SP-456
13 1 SLOPE TUBE (OUT) SP-460
14 1 SLOPE TUBE (MID) SP-462
15 1 SLOPE TUBE (IN) SP-464
16 1 PUSH TUBE (OUT) SP-466
17 1 PUSH TUBE (IN) SP-468
18 REF HYD VARIABLE STRIKE OFF
BLADE EXTN. + 1 FT BLADE
INSTALLATION
SP-752
19 1 SLEEVE (BLADE PIVOT) SP-497
20 1 MTG BRACKET (PUSH TUBE) SP-498
21 1 STABILIZER (OUTER),
BLADE - PUSH TUBE
SP-501
22 1 STABILIZER (IN) SP-506
23 2 CYLINDER, HYD., TIE ROD,
2-1/2” x 18”
M1013
24 1 BALL HITCH, 2 DIA, ZINC-
PLATED
M11005
25 2 TIE ROD END M0192
26 1 REWORKED DOUBLE CAM SP-701
27 5 PIN, HITCH W/ LYNCH PIN 3/4
x 4-3/4
M11006
28 6 LUBE FITTING, STRAIGHT
(SERRATED)
1743-8
29 2 HEX HD CAP SCREW 5/16-18
UNC x 5/8
HCS-5/16-18-0.63
30 8 HEX HD CAP SCREW 5/16-18
UNC x 7/8
HCS-5/16-18-0.88
31 10 LOCK WASHER, 5/16 LKW-5/16
32 10 HEX HD CAP SCREW 1/2-13
UNC x 1-3/4
HCS-1/2-13-1.75
33 4 HEX HD CAP SCREW 1/2-13
UNC x 1-1/2
HCS-1/2-13-1.50
34 6 HEX HD CAP SCREW 1/2-13
UNC x 2-1/4
HCS-1/2-13-2.25
35 2 HEX HD CAP SCREW 1/2-13
UNC x 2-1/2
HCS-1/2-13-2.50
36 1 SOCKET HD CAP SCREW
1/2-13 UNC x 1-3/4
KCS-1/2-13-1.75
37 1 ELASTIC STOP NUT, 1/2-13
UNC
ESN-1/2-13
38 18 HEX NUT, 1/2-13 UNC HXN-1/2-13