A5/A3™ Service Manual 046-001141-00 2 - 9
Installation Guide Assembly
FIGURE 2-12
NOTE: Check that there are green beads in the desiccant pack and that they
have not turned pink.
14. Rotate the casters 90° and carefully roll the A5/A3 unit down the ramp. Remove the bag from
the unit. Save the bag in case repacking is needed.
15. Open the bottom drawer and remove the Breathing Assembly (P/N: 115-017020-00 ) and the
Bag Arm Assembly (P/N: 115-017021-00 ).
FIGURE 2-13
16. Install the Breathing Assembly on the side of the A5/A3. Align the Assembly carefully, and then
push it firmly towards the A5/A3 until the Assembly clicks into place.
To Next Page
Loading...
