Operator’s Manual of Anesthesia System 6 - 15
Operations Set Ventilation
NOTE: It is not recommended to use lung recruitment where patients may
spontaneously breath.
NOTE: Terminate the lung recruitment ventilation when the physiological
state of the patient is abnormal.
6.6.10.1 One-Step Recruitment
NOTE: Before activating the lung recruitment ventilation, ensure that all
related parameters are set appropriately.
1. On the Main Screen, select the [Lung Recruitment] soft key > [One-Step Recruitment].
2. Set the lung recruitment parameters in the pop-up menu.
3. Select the Start soft key to start the lung recruitment ventilation. [Lung Recruitment] is
displayed in the current ventilation mode area.
Figure 6-12 One-Step Recruitment
Control
parameters
Loop
Dynamic short
trend in recent
12 minutes
To Next Page
Loading...
