Mindray A8 - Screen

Setup Menu System Interface
4 - 32 Operator’s Manual of Anesthesia System
4.7.5 Screen
Figure 4-34 Screen
CO
2
Location
When the AG module is configured, the system will display the CO
2
waveform on the Main Screen.
The [CO
2
Location] can be set to [To p] or [Bottom]. Based on the [CO
2
Location] setting, the system
displays the CO
2
waveform at the corresponding location on the Main Screen.
Mini Trends Duration
See (Pages 4-20) 4.4.3 "Mini Trends Screen" and (Pages 4-21) 4.4.4 "Compl/PEEP Trend Screen".
Screen Saver
Set the delay time for entering the screen saver or disable the screen saver feature by setting it OFF.
When the system enters the screen saver status, the status screen is displayed as blank, and the Main
Screen displays Mindray at random locations as the screen saver. The system will exit from the screen
saver when it detects the following operations:
• A touch on the Main Screen
• An operation on the main control knob
• An operation on either Flow Control Knob
• The BFCS cover is opened/closed
• The ACGO is enabled
•The HFNC is enabled
• The Auto/Manual switch is flipped
• A module is inserted/withdrawn (AG module)
• An alarm is issued