Mindray A8 - AG Settings (AG Module Configured); Information; Oxygen (O2)

Setup Menu System Interface
4 - 30 Operator’s Manual of Anesthesia System
4.7.2 Oxygen (O
2
)
Figure 4-32 Oxygen (O
2
)
Calibrate O
2
Sensor
You can select the [Calibrate O
2
Sensor] button to calibrate the O
2
sensor. Follow the prompts on
the screen to perform the operation: See "21% Oxygen Calibration" on Pages 9-4 for more
information.
4.7.3 AG Settings (AG module configured)
See (Pages 7-1) 7.0 "Anesthetic Gases and O
2
Concentration Monitoring" for more information.
4.7.4 Information
Displays the software version, network setup information and other related information of the
equipment. The information is for view purpose only and does not support modifications.