Customizing the Analyzer Software
5-33
5.11.2 Setting reporting units
1. Enter the administrator password as instructed in Chapter 5.4.1.
2. Enter the “Parameter Units” screen.
3. SELECT the desired unit from the corresponding pull-down list (e.g. RBC in Figure
5-44).
Figure 5-44 Selecting a unit for RBC
5.11.3 Exiting the “Parameter Units” screen
Press [MENU] or [MAIN] to exit to the system menu or the “Count” screen and the changes
will be saved automatically.
To Next Page
Loading...
