D-1
D Communication
D.1 Introduction
The BC-3000 Plus can transmit the sample data and QC data to an external computer (a host)
through its RS-232 serial port. The transmission can be conducted either automatically or
through the command of the operator after the completion of the sample analysis. This
section gives detailed discussion about the setup of transmission parameter, RS-232 serial
port and the data transmission format, therefore, providing detailed information for the
software engineers to program and for the user to conveniently perform transmission.
z When the communication symbol in the upper right corner of the screen
appears animated, it indicates the communication is in process.
To Next Page
Loading...
