Understanding Your Analyzer
2-11
2.4 Instrument Software
2.4.1 Main Screen
After finishing the startup procedure, the analyzer enters the “Count” screen, which is the
screen to be used most frequently, hence the name “Main screen”. The main screen is shown
in Figure2-8.
Figure2-8 “Count” screen
Error Message Area
The Error Message area displays error messages one by one, alternating every two
seconds.
Title Area
The Title area displays the title of the current screen, which, in case of Figure2-8, is “Count”.
Status Area
System Status Area
The System Status area displays whether this analyzer is ready for the next analysis. When
it displays “Ready”, it means this analyzer is ready and you can proceed to analyze the next
sample. When it displays “Waiting”, it means the analyzer is not ready for the next run yet.
When it displays “Running”, it means this analyzer is analyzing a sample.
Title area
Status area
Analysis area
Error message area
Help area
Menu area
To Next Page
Loading...
