Maintaining Your Analyzer
10-27
10.6 Using the “System Test” Program
Press [MENU] to enter the system menu. SELECT “Service → System Test” ( Figure10-32)
to enter the “System Test” screen (Figure10-33), where 19 test items are available. Note that
you need to enter the administrator password to test the motors.
SELECT the desired item to perform the corresponding test. The test result will be displayed
later. In case of any abnormal test result, see Chapter 11 Troubleshooting Your Analyzer
for solutions and if necessary, contact Mindrayor your local distributor for assistance.
Figure10-32 System test
Figure10-33 System test screen
Press [MENU] to exit to the system menu and the screen will display “Resetting” and the
system menu will pop up later.
To Next Page
Loading...
