Mindray BC-3000 Plus - 5.9 Reagent Exp. Date

Customizing the Analyzer Software
5-27
5.9 Reagent Exp. Date
The ”Reagent Exp. Date” screen is where you set expiration dates for the diluent, rinse and
lyse. The analyzer will alarm you for expired reagents when the system time exceeds any of
the three expiration dates.
5.9.1 Entering the “Reagent Exp. Date” screen
Press [MENU] to enter the system menu.
Figure 5-37 System menu
SELECT ” Setup→ Reagent Exp. Date” (Figure 5-37) to enter the ”Reagent Exp. Date”
screen (Figure 5-38).
Figure 5-38 “Reagent Exp. Date” screen