Reviewing Sample Results
7-32
2. Press [↑] or [↓] to select the WBC histogram;
3. Press [3] to select the third discriminator, as Figure7-48 shows;
Figure7-48 Adjusting discriminator (1)
4. Press [←] to move the third discriminator to 100fL, as Figure7-49 shows;
Figure7-49 Adjusting discriminator (2)
5. Press [ENTER] and a message box will pop up, as Figure7-50 shows.
Figure7-50 The message box to ask you to save the changes
CLICK “Enter” to save the changes and return to the “Search Histogram Review” screen;
CLICK ”Cancel” to abort the changes and return to the “Search Histogram Review” screen.
Printing sample results
Press [PRINT] to print out the current sample result.
To Next Page
Loading...
