Using the QC Programs
8-31
8.4.2 Running the Controls
Selecting Whole Blood mode
Press [MENU] and SELECT “Mode” to enter the “Mode”screen. SELECT “Whole Blood”
from the “Sample Mode” pull-down list.
Entering the “
X
-R Count” screen
Press [MENU] to enter the system menu. SELECT “Quality Control →
X
-R Analysis→
X
-R
Count → File 1” to enter the “
X
-R Count” screen (Figure8-38).
Figure8-38 “
X
-R Count”screen
z Be sure to use the Mindray - specified controls. Using controls other than
the specified will lead to misleading results.
z Refer to the instructions of use of the controls for how to store and use the
controls.
To Next Page
Loading...
