Appendices
D-8
MCV[fL] ###.#
MCH[pg] ###.#
MCHC[g/L] ####
Body of the text end
If handshake is enabled [EOT]
If handshake is disabled [EOF]
If handshake is enabled [ETX]
D.4 Transmission
D.4.1 Defining Transmission Settings
The data format is fixed for the transmission so that every byte to be transmitted has 7 data
bits and 1 stop bit. Enter ”Setup → Transmission” screen and edit the communication
settings as instructed by Chapter 5.6.
D.4.2 Transmission at Count Screen
If the auto transmission function is on, once the analysis is done, the analyzer will
automatically transmit the results to the external computer. If the auto transmission function is
off, you can only transmit the results manually at the Review screen.
D.4.3 Transmission at Review Screen
Select the results you want to transmit and transmit them to the external computer as
instructed by Chapter 7.2.1. .
D.4.4 Transmission at L-J QC Table Screen
Transmit the results as instructed by Chapter 8.2.3.
To Next Page
Loading...
