Installing Your Analyzer
4-8
4. The released sample probe is shown in Figure 4-4;
Figure 4-4
5. Lift the front panel latch and close the front panel and then release the latch to lock it.
Finally close the right door.
4.4.2 Connecting Reagent Containers
z Consider all materials (samples, reagents, controls, calibrators, or
components that contain or have contacted human blood) as being
potentially infectious. Wear proper laboratory attire (including rubber
gloves, a laboratory coat, and eye protection) and follow safe laboratory
procedures when handling any material in the laboratory.
z If the reagents accidentally spill on your skin, wash them off with plenty of
water and if necessary, go see a doctor; if the reagents accidentally spill into
your eyes, wash them off with plenty of water and immediately go see a
doctor.
To Next Page
Loading...
