Installing Your Analyzer
4-15
4. Close the recorder door, as Figure 4-14 shows;
Figure 4-14
4.4.4 Connecting the Keyboard
Take out the keyboard from the accessory kit and connect it to the keyboard interface marked
“KB” at the back of the analyzer.
4.4.5 Connecting the Printer (Optional)
Follow the printer’s instructions for use to connect the printer to the parallel port at the back of
the analyzer.
4.4.6 Connecting the Bar-Code Scanner (Optional)
Follow the scanner’s instructions for use to connect the scanner to the serial port1 at the back
of the analyzer.
z Be sure to use the printer and/or scanner of the specified model.
To Next Page
Loading...
