Customizing the Analyzer Software
5-5
5.2.4 Enabling/disabling Auto print
If the “Auto Print ” function is on, the analysis result will be automatically printed out once the
analysis is finished. To enable (or disable) this function, SELECT “ON”(or “OFF”) from the
“Auto Print” pull-down list, as Figure 5-6 shows.
Figure 5-6 Enabling/disabling auto print
5.2.5 Exiting the “Print” screen
Press [MENU] to exit to the system menu or [MAIN] to exit to the “Count” screen, and the
changes will be saved automatically.
To Next Page
Loading...
