Customizing the Analyzer Software
5-9
ENTER “3000” and a message box will pop up to remind you of the current password level,
as Figure 5-11 shows.
Figure 5-11 A message box to confirm the user level
CLICK “Enter” to confirm the password and exit to the system menu.
5.4.2 Resuming the common user password
Enter the “Password” screen and the default password is the common user password.
Press [MENU] again and a message box will pop up to remind you of the current password
level, as Figure 5-12 shows.
Figure 5-12 A message box to confirm the user level
CLICK “Enter” to confirm the password and exit to the system menu.
5.4.3 Ref. Range
The ”Ref. Range” screen is where you view and/or set (if you have the administrator
password) the high and low limits for your patients. The analyzer flags any parameter value
above (H) or below (L) these limits.
This analyzer divides patients into 5 demographic groups, as Table 5-1shows.
To Next Page
Loading...
