Mindray BC-3000 Plus - Page 80

Customizing the Analyzer Software
5-12
Figure 5-15 “General”screen
5.4.6 Exiting the “Ref.Range” screen (e.g. the “General”
group)
Press [MENU] to exit to the system menu; press [MAIN] to return to the “Count” screen. If
you have made any changes, a message box will pop up to ask you to save the changes, as
Figure 5-16 shows. CLICK “Enter” to save the changes and exit to the system menu or the
main screen; CLICK “Cancel” to abort the changes and exit to the system menu or the
“Count” screen.
Figure 5-16 A message box to confirm the changes