Mindray M9 User Manual

8-6 Structure and Assembly/Disassembly
8.2.4 Network Adaptor
1. Unscrew four screws (M3 X 6 cross panhead screw) on the hard disk cover, and then remove
the hard disk cover.
2. Extract the network cables. Extract the signal cables of monitor via black handle.
3. Push the metal snap closure backwards as the thick arrow shows. Take the wireless network
adaptor out by following the direction as left thick arrow shows.
Network adaptor snap closure
Extract signal cables of monitor via black handle
M3 X 6 cross panhead screw (4 screws)
Hard disk cover

Mindray M9 Specifications

General

Type	Portable Ultrasound System
Battery	Rechargeable lithium-ion battery
Battery Life	Up to 90 minutes
Display	15.6 inch high resolution LED monitor
Imaging Modes	B, M, Color, Power, PW, CW
Transducers	Linear, Convex, Phased Array
Transducer Ports	3
Probe Connectors	3
Connectivity	DICOM, USB, HDMI
Operating System	Windows-based