Mindray M9 User Manual

8-24 Structure and Assembly/Disassembly
Take out the front cover along the left side (or right side), and then take out it along the frame of
the monitor.
3. Unscrew 1 screw on the cable harness (M2.5 X 5 cross slot screw), and remove the cable
harness. Take out the cables from channel.
M2.5 X 5 cross slot screw (1 screw)
Cable harness
Take out the front cover form both sides
Screw cap. Unscrew M2.5 X 4 cross
panhead screw (4 screws)

Mindray M9 Specifications

General

Type	Portable Ultrasound System
Battery	Rechargeable lithium-ion battery
Battery Life	Up to 90 minutes
Display	15.6 inch high resolution LED monitor
Imaging Modes	B, M, Color, Power, PW, CW
Transducers	Linear, Convex, Phased Array
Transducer Ports	3
Probe Connectors	3
Connectivity	DICOM, USB, HDMI
Operating System	Windows-based