Mindray M9 User Manual

Structure and Assembly/Disassembly 8-41
4. Remove holder bracket, hook base of probe cable, moveable cable hook.
Unscrew 6 screws (M4 X 12 cross panhead screw, 3 screws for each left and right side) on the
holder bracket, and then take out the holder bracket.
Unscrew 2 screws (M4 X 12 cross panhead screw) on the base of probe holder, and take out
the base of probe holder.
Unscrew 2 screws (M4 X 12 cross panhead screw, 1 screw for each left and right side) on the
cable hook, and then take out the cable hook.
M4X12 cross panhead
screw (10 screws)
Cable hook (one
for each left and
right side)
Base of
probe holder
Holder bracket
(one for each left
and right side)
M4X12cross panhead screw (4 screws; 2
screws for each left and right side)

Mindray M9 Specifications

General

Type	Portable Ultrasound System
Battery	Rechargeable lithium-ion battery
Battery Life	Up to 90 minutes
Display	15.6 inch high resolution LED monitor
Imaging Modes	B, M, Color, Power, PW, CW
Transducers	Linear, Convex, Phased Array
Transducer Ports	3
Probe Connectors	3
Connectivity	DICOM, USB, HDMI
Operating System	Windows-based