Mindray SV300 - O 2 Therapy Timer; Switching off O Therapy

9-13
9.13.3 O
2
Therapy Timer
Select the O
2
Therapy Timer area in the top left corner to access the window as shown below.
Select [Stop]/[Start] to stop or start timing. Select [Reset] to reset the displayed time of the
timer.
Enter the number of timing minutes in [O
2
Therapy Time Setup] to start the timer. When the
set time is equal to the time of the timer, the system gives prompt sound and O
2
supply is not
interrupted. The O
2
Therapy Timer area flashes until you preform the following operations:
 Stop the timer, or
 Adjust the set time, or
 Exit the O
2
Therapy
9.13.4 Switching off O
2
Therapy
During O
2
therapy, select the [Standby] key to enter Standby status after confirmation, so as
to switch off the O
2
therapy function.