4-4
4. Alarm message field
Displays the active alarm messages. When there are multiple alarm messages, the
number of alarms is displayed. In this case, select the alarm message field, and you can
view active alarm messages, alarm occurrence time and alarm level on the accessed
window.
5. Prompt message field
Displays the active prompt messages.
6. AUDIO PAUSED icon and countdown field/inactive alarm prompt field
When the icon for 120-second AUDIO PAUSED countdown, which is
, is
displayed, it indicates that there are active alarms and the audible alarm tones are
paused.
When the icon
is displayed, it indicates that there are most recent alarms but the
alarm conditions disappear. Press this icon, and you can view the most recent alarms (up
to 9 alarm messages are displayed) on the accessed window. You can also clear the most
recent inactive alarms with the [Reset] button.
7. USB icon field
Displayed when the system is connected to an identifiable USB device.
8. System time field
Displays current system time.
9. Power status icon field
Displays the status of currently-used power supply.
10. Soft key field
Displays soft keys: Alarm Setup, O
2
↑ Suction, Nebulizer, Tools, Lock, Freeze, Setup
and Standby.
11. Parameter setup quick key field
Displays ventilation setting parameters corresponding to the active ventilation mode.
12. Ventilation mode setup field
Displays the keys for setting up ventilation modes.
13. Waveforms/Spirometry/Values field
Displays waveforms, spirometry loops, or measured values.
14. Numerics
Displays measured values of most important parameters, as well as alarm limit values
(where applicable), and alarm notification (flashing if alarm activated).
To Next Page
Loading...