Mindray SV300 User Manual

4-8
Select the [Review Ref.] button to display the window as shown below.
 Small loop windows : These small graphic windows show the reference loops. The
reference loops (up to 5) are displayed from oldest (left) to newest (right). The
information of selected reference loop is displayed in cyan highlight.
 Large loop window : This graphic window shows an enlarged view of the selected
reference loop.
 Loop type : The Loop Type selection is used to choose the type of loop to review. The
choices are P-V , F-V, P-F, and V-CO
2
. Default loop type is P-V.
 Parameter data area : This area displays monitored parameter data related to the saved
reference loops.
Selected reference
loop (large)
Non-selected reference loop
Parameter
data area
Selected reference
loop (small)
Non-selected
reference loop
Loop type

Mindray SV300 Specifications

General

Waveform Display	Pressure, Flow, Volume
Battery Backup	Up to 2 hours
Ventilation Modes	VCV, PCV, SIMV
Tidal Volume Range	20 to 2000 mL
FiO2	21 to 100%
Inspiratory Time	0.2-5.0 s
Monitoring Parameters	Paw, Ppeak, Pmean, Pplat, PEEP, VTI, VTE, MV, f, FiO2, I:E
Alarms	High/Low Airway Pressure, High/Low Minute Volume, High/Low Tidal Volume, High/Low Respiratory Rate, High/Low FiO2, Apnea, Power Failure
Power Supply	AC 100-240V, 50/60Hz
Peak Flow	180 L/min
Trigger Sensitivity (Flow)	0.5-10 L/min