7-19
Airway connection involving the VT Plus
Select the large-volume flow inlet/outlet (0 – 120 L/min) on the calibration device if the VT is
used as the calibration device. See the following figure:
Airway connection involving the VT
If FPM is selected, connect to the inspiratory flow sensor port (0～250 L/min) of the
anesthesia machine, as shown below.
Pneumatic connection with FPM
8. Select [Start]. The menu as shown in the following figure is displayed:
Air flow
direction
Water
collection cup
adapter
To Next Page
Loading...
