Minebea Intec PR 5310 - Page 95

6. Operating | 6.2 - Configuration and adjustment via the keypad | 95
– 056Wgt-20
Weight at 20 mA
– 057CAL-04
Weight at 4 mA. Adjustment of the analog output, see Chapter Adapting the
analog output.
– 058CAL-20
Weight at 20 mA. Adjustment of the analog output, see Chapter Adapting
the analog output.
oP · Operating parameters
– 060Addr
Device address
– 061SEqnr
Next free sequence number
– 062tArKEy
Tare key
tAr.rES Set tare/reset tare
tAr.tAr Set tare/set tare again
diSAbL Disabled
– 063ZErKEy
Zeroset key
not.tAr Only if tare was not set
rES.tAr Reset tare on zero set
diSAbL Disabled
– 064nbtKEy
NBT key
diSAbL Disabled
EnAbLE Enabled
– 065PrtKEy
Print key
diSAbL Disabled
EnAbLE Enabled
– 066tStKEy
Test key
diSAbL Disabled
EnAbLE Enabled
– 067tiMout
Timeout (HH.MM) for automatically exiting the setup menu
dt · Date & time
– 068
YEAr Year (YYYY)
dAtE Month-day (MM-DD)
tiME Hour.minute (HH.MM)