EasyManua.ls Logo

miniClima EBC - Menu Entry T@Sensor; Menu Entry T@Cond

Default Icon
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
resembling the value on the display start to blink. Use the Up or Down buttons to make your changes,
and confirm the new value with Enter. The value will not be stored as long as you do not press this button.
4.5.7 Menu entry t@Sensor
With this entry you can check for the present temperature (in °C) inside the case as measured from the RH/T
sensor (possible with masters and slaves likewise - the value is always taken from the RH/T sensor in the
case, thus identical).
Press Menu/Esc to call up the menu, then press Up six times to move to the menu entry for the
temperature at the RH/T sensor (t@Sensor). The display reads:
t @ S e n s o r 2 0 ° C
Fig. 18 - Display message in menu mode, 7th menu entry.
4.5.7.1 Description/options
t@Sensor is the variable that can be read out with this menu entry; 20°C (example) is the currently present
value of this variable.
Press Menu/Esc once more to leave the menu mode.
indicates that you can move up and down the menu to go to the next/previous menu entries by pressing
Up or Down.
A missing symbol indicates that this is a read out menu entry, where no variables can be set.
4.5.8 Menu entry t@Cond
With this entry you can check for the present temperature (in °C) at the specific EBC's (master or slave)
intern condenser.
Press Menu/Esc to call up the menu, then press Up seven times to move to the menu entry for the
temperature at the condenser (t@Cond). The display reads:
t @ C o n d - 0 5 ° C
Fig. 19 - Display message in menu mode, 8th menu entry.
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
32 / 54

Table of Contents