miniClima EBC - Electrical Connections

miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
4) Use a tool (i.e. a screw driver or the one originally delivered by us) for opening up the connection again.
Push the latches on both sides to the outside in order to do so:
3.2.2 Connecting the hosepipes to the EBC
Dispose of the protective coverings on the hosepipe fittings of the EBC, if any. After that, proceed as
described above in order to attach the hosepipes to the EBC's fittings. Mind the different types of fittings
mentioned above.
3.3 Electrical connections
3.3.1 Handling the ferrite core
In case you need to take off the ferrite core(s) of the RH/T sensor cable or the control line temporarily, this
can be done easily (kind and colours of the cores vary):
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
18 / 54