miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
H y s t . 0 2 % ↵
Fig. 23 - Display message in menu mode, 12th menu entry.
4.5.12.1 Description/options
Hyst. is the variable that can be altered with this menu entry; 02% (example) is the currently set value of this
variable (in %RH).
Press Menu/Esc once more to leave the menu mode without changing any values.
indicates that you can move down the menu to go to the previous menu entry by pressing Down. No
changes will be made to the rH Corr value by doing so.
↵ indicates that this variable can be set by pressing ↵ Enter.
Press ↵ Enter to alter the value for Hyst. (possible range: 1-4%). The digits resembling the value on the
display start to blink. Use the Up or Down buttons to make your changes, and confirm the new value
with ↵ Enter. The value will not be stored as long as you do not press this button.
4.6 Procedures during operation
During normal operation every EBC (master or slave) always displays the currently present humidity level (in
%RH) and whether this level is in range (=setpoint plus/minus hysteresis) or not. If not, the display prompts
the kind of process that is currently activated in order to approach the setpoint (humidification or
dehumidification) - see Fig. 8 and Fig. 9 (p. 24). Slave units additionally prompt a rightwards arrow in the
display (leftmost symbol), in order to be immediately recognised as working in slave mode.
The LED on the front plate is on and gleaming green, signalling that the system works properly. The
changeover contacts for your (possibly installed) external status display devices are both switched ("make
contact"; cp. Table 1, p. 22) according to the EBC's status of being switched on and having not issued any
alarm. During all times the intern fan for the circulation of the air between EBC and case is running with a
silent buzz.
From time to time short pumping processes can be heard: During dehumidification the collected condensate
is transported to the bottle every now and then. When humidifying the EBC's intern pump repeatedly
forwards little amounts of distillate/condensate from the bottle to the inside of the EBC in order to keep the
water in the tub at the required level. To keep the intern condenser from getting covered in ice with an EBC
constantly working in dehumidification mode, the unit will execute short defrosting processes every 30
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
36 / 54
To Next Page
Loading...