miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
Fig. 1 - Rating plate with series ID,
S/N and indication of the built-in air
circulation fan (Standard-ULV,
ULV+ or ULV++).
2.4 Identifying the type (EBC10, EBC11, EBC12)
The type is provided on the front side behind the handle:
Fig. 2 - Indication of
the EBC type on the
front side, behind the
handle.
2.5 Identifying the serial number (S/N)
The serial number (four digits labelled S/N) is indicated on the rating plate on the backside of the EBC (see
Fig. 1).
2.6 Verifying the strength of the circulation fan
Your EBC can be equipped with a standard fan (ULV) or with one of the stronger fans (ULV+ and ULV++).
The latter are used with units that shall work in installations with an increased air resistance inside the air
circuit system. The fan type built into the unit is marked on the EBC's rating plate. (see Fig. 1).
2.7 Identifying the kind and number of the water level sensors for the bottle
By default every EBC is equipped with one water level sensor for the bottle high mark. Once the bottle
becomes full, the sensor provides for the respective alarm to be issued. The devices can optionally also be
ordered to be equipped with a second sensor for the low mark of the bottle, so that the user can be alarmed
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
9 / 54
To Next Page
Loading...