EasyManua.ls Logo

miniClima EBC - Page 52

Default Icon
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
miniClima Schönbauer GmbH
Brunner Str. 21b, 2700 WIENER NEUSTADT, AUSTRIA, EU
Tel. | Phone: +43 2622 24964, +43 6991 24964 01, Voicemail: +43 6993 24964 01, Fax: +43 2622 24964 15, E-Mail: office@miniclima.com
www.miniclima.com, twitter.com/miniClima, www.linkedin.com/company/miniclima-schönbauer-gmbh, www.google.com/+Miniclima, www.facebook.com/miniclima
UID | VAT-ID: ATU61994435, EORI: ATEOS1000001229, DVR: 4008782
Firmenbuchnummer | Trade Register Number: 267137z (Landesgericht | Regional Court of Wiener Neustadt)
hosepipe adapters of type 1 or 2: Put the clamping rings (if any) and union nuts of the EBC's hosepipe
fittings back on the device, affixing together with them some kind of protective covering (e.g. a small piece
of foil) so as to prevent that dust or particles soil the air conditioning part of the device (the latter is only
necessary if the device is not going to be packed dust/particle protected as a whole). Models with
hosepipe adapters of type 3: If the device is not going to be packed dust/particle protected as a whole,
use rubber bands to fix small pieces of foil for covering the openings of the adapters.
5) Pack up and store/ship the device in a way that protects it against external hazards. Do label every parcel
plainly visible as being "Fragile".
IMPORTANT: If the device in question has been in use on showcases and/or objects containing hazardous
substances - in particular but not limited to Asbestos - do not send in this device prior to informing us on the
matter in detail. We will require exact information on the kind of dangers we might be exposed to and on how
to effectively protect us. Mind that for service and repair, your EBC is going to be dismantled completely and
that all air and water handling parts will usually lay open in our hands. Furthermore, please do not at all send
in units that have been exposed to a relevant level of radioactivity.
IMPORTANT: An EBC has to be stored in a non-condensing environment at max./min. 5-35°C, 15-80%RH.
The RH/T sensors need a non-condensing environment at max./min. 10-50ºC, 20-60%RH when being
stored.
Applies analogously to the individual products of series EBC10/11/12 (Rev.3). As of 24.11.2014. Subject
to modification.
miniClima - Manual_EBC10-11-12(Rev.3)_en
52 / 54

Table of Contents