Mircom 9500 Series User Manual

MIRCOM TECHNOLOGIES LIMITED, 9500 Series: No Subscriber Line Page 46
#=Store, *=Abort
00 To 99 Sec. x x
Press # to store or * to abort entry. The next display should appear...
Press *
To Exit
Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to
NORMAL MODE.
MULTIPLE/SINGLE ENTRANCE SELECT (9501A only)
To select Multiple or Single entrance, scroll through until you reach the feature as shown below.
Pick Multi/Single
Option - Press #
Press # to access the feature. The display should appear...
Multi or Single
M=00 S=11 _ _
Enter 00 for multiple entrances or 11 for single entrance. The next display should appear...
#=Store, *=Abort
M=00 S=11 x x
Press # to store or * to abort entry. The next display should appear...
Press *
To Exit
Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to
NORMAL MODE.
RING CYCLE SELECT (9501A only)
To change the number of Ring Cycles, scroll through until you reached the feature as shown below.
Adjust # of Ring
Cycles - Press#
Press # to access the feature. The display should appear...
# RING Cycles
00 To 99 Cycl. _ _
Enter the number of ring cycles. The next display should appear...
#=Store, *=Abort
00 To 99 Cycl. x x
Press # to store or * exit entry. The next display should appear...
Press *
To Exit
Press * to exit to PROGRAM MODE menu. To quit, enter *000 while at PROGRAM MODE menu to return to
NORMAL MODE.

Mircom 9500 Series Specifications

General

Brand	Mircom
Model	9500 Series
Category	Intercom System
Language	English