Mircom QX-mini Programming Guide

12
Working with the Configurator
4. Under message composition, when creating messages for evacuation and alert, ensure
stage for evacuation, and alert is selected from the drop down as shown below. For any
other messages, “manual” must be selected.
Figure 13 Alert Stage
5. Messages can be assigned to switches by using left click on the mouse, keeping it
pressed and dragging the message to the appropriate switch.
Figure 14 Click and drag the message to the appropriate switch
Use left-click,
keep it pressed,
and drag

Mircom QX-mini Specifications

General

Brand	Mircom
Model	QX-mini
Category	Security System
Language	English